-
The Z-1000 controller kit replaces the Z-1002, but with no LED confusion, false readings, and can simultaneously operate multiple Z-1000 switch machines. This is more dependable than alternate methods due to the isolation buffer on our product! Panel mounted too! This controller has its own supply for the LEDs and only receives a very small signal from the Z-1000. This ensures the LED is on & properly indicating the switch(es) position. The O22 version operates the same as above and the instructions provide details for connection and installation. The toggle switch is center off with momentary positions to throw the switch machine. Nice and clean installation requires drilling three holes in the control panel. The LEDs are positioned where you want them and the toggle switch can be mounted near the switch icon on the panel. This is available with just the controller board, or as a complete kit with board, the LED PCBs and switch. Note that since we cannot control what you do if the controller is used with other switches or LEDs/lights, there is not warranty unless used with the specified items. The top right connector on the control board can handle up to 2 Amps AC or DC to additionally control signals or other accessories. If you find challenges on your installation, just contact us! -
This Big Boy has been upgraded with Cruise Commander, Articulated Sound, and LED lighting. Smoke is the original Seuthe units. Due to the internal design of the boiler it is not feasible to add a blower smoke unit. Full lubrication and checkout of operation completed by Royz Trains. Price includes shipping to the USA. -
We offer various LED and other power supplies to support panel LED lighting, relay operation, and various other applications. Voltage /current properties identified below. The input to all of our supplies is AC or DC accessory voltage up to 24 volts. Note not all LEDs use the same voltage. -
This class of used product includes the DCDR and Odyessy 1 boards. If you are looking for a particular version please contact us for availability. Do not place an order until you hear from us! There are four different versions. Each item worked prior to removal. No Warranty is provided for these items. -
This kit supports variable speed and direction of DC motors up to 12 VDC. Originally developed to support turntable operation it has other applications such as bridge motor control, etc.The turntable speed and direction controller was initially designed for the Millhouse Studios Turntables. It is available as hand-held unit. It requires an input voltage of 12-22 VAC for normal operation. This controller will work with any motor driven accessory requiring a voltage range of 1.5 VDC to 12 VDC. The smaller voltage is the stall voltage for the motor drive and provides a very slow bridge movement allowing you to manually stop the bridge as the tracks line up. Other Voltage Ranges are available upon request. This capability is much more affordable than a fully indexed controller and easily allows for visual alignment of the tracks. To date this item has been used on several Millhouse Turntables, a Bowser turntable, bridge controllers and other motor driven applications.
-
Simple PCB based controller with screw terminal inputs to allow for external control of many accessories, signals, or switches from an external stimulus. -
Newest Add is a dual 10A board with plug that operates with 5VDC signal and may be used with our Accessory Controllers. In addition we have a selection of relays support different configurations able to control up to 15 Amp current with a 12 VDC low level signal. Detailed instructions provide example applications. Supporting 12 VDC supplies are sold separately. Each of the two possible power relays have onboard LED indicators showing when the relay has been energized. Typical application is to control signal lights along with power to a track section from a remote location. The low level current necessary to control the relay(s) is thus handled using much less expensive, smaller gauge layout wire and miniature toggle switches. Also offered are occupancy detection/signal presentation, three power relays, etc. -
Sale!
These kits come with all necessary items to assemble and install on your layout. Additionally, Royz Trains provides 3mm warm white LEDs that may be used in place of the micro-LEDs in the streetlights. The structure lighting comes with 3mm, wide angle (120 degree) warm white LEDs. Speical simulations available include flickering internal lighting (failing light), apparent random on/off of LED lighting and multiple colors. -
Out of stock
These are Cruise Commander boards that have been repaired and fully checked out. The R4LC is not included! Normal warranty applies. -
Bill Board Power Supply. This power supply supports the range of billboards sold by Len’s Train & Custom Diecast Shop that use the three AA battery holder. The suitability of this power supply for other applications has not been tested. It can replace the Lemax Adadptor Item #645017. Up to six (6) billboards may be powered from a single supply when using a minimum of 5 volts up to 25 volts feeding the screw terminals of the Royz Trains power supply. If a DC supply is used, connect the positive to the right side of the screw connector. To connect one or more billboards, first cut the wires to the supplied battery box. Bare the two wires and connect to the red and black wires from the supply. Provide input power to the supply as noted above. If the billboard lights do not lite, reverse the white wires from the billboard. The quick connect adapter shown is available for a nominal charge. High Current Version A high current version of the supply is also available and will support up to 12 of the Lemaz billboards simultaneously. -
New Design provides screw terminal connection and improved PCB design. This is a simplified version of the accessory controller above and a reliable replacement for the Z-2502. It includes momentary contact switch and two LEDs mounted on a PCB controller. It is mounted below the control panel. Select right hand or left hand switch operation. Simple template provided to drill the three holes in control panel.
