Crossing Signal (Pair) – Custom Signals

Crossbucks Lights with LEDs

We have several variations of these Custom Signal Crossbucks.  These signals work with our Crossbuck Controller and IR sensors.  For isolated track sections, the more simpler Controller works great.

These crossing signals are the last of the O Scale Custom Signal brand of the crossbucks.  Quality is almost as good as the Tomar crossbucks.  The LEDs include a lens.  Same drive board is used for operation.  Trigger from controller board may be IR beam OR isolated track.  These signals come two per purchase as listed, or single units.  One mast will have the characteristic bell at the top.  On the real railroads only one mast of two would have the bell.  The signals come with a phone plug that will be cut off to use the Royz Trains Crossbuck Controller.  We have controller boards with proper current limiting resistor but some may require a 680 ohm resistor (supplied) is added to the common anode lead and then the wires are connected to the drive board.  If you use these product with other than our products, the user is responsible for providing the proper resistor size.

Multiple configurations are available:

• Two lights per signal – two signals
• Four lights per one signal, Two lights on the second signal.
• Six lights per one signal, two lights on the second signal.
• If you need to mix and match, contact me for availability.

Also if you want just one signal of either of the three configurations, please contact me.