Blower Smoke Unit

$2.50$48.00

13 in stock (can be backordered)

Complete Blower type Smoke Unit.

Operates from track voltage.  It may also be controlled by TMCC and external chuff switch such as a cherry or reed switch.  When not in full chuff, there will be some smoke emanating from the stack.  For diesel operation, the smoke is continuous at the maximum level.  This unit Smokes MUCH better than standard Lionel unit and a little less than MTH.

Demo here: SmokeOperation

Smoke unit can operate from either AC or DC track voltage.  Details are provided in the accompanying instructions.  Fixed smoke output and fan operation is achieved with about 8.5 VAC (9.5 VDC) input.  This allows support in both conventional and command applications. More information at bottom of page!

Need to have chuff in sync with ERR Steam Sound board?  Get our Cherry Switch Board to work with the ERR AC/DC Commander.  Will work directly with Cruise Commander and the MiniCommander 2 for Smoke and Headlight.  And it will also work with the MiniCommander ACC and/or EX versions!

Smoke board only.

We have found this useful for upgrading existing smoke units such as the Lionel and some MTH units with existing smoke bowl and fan of the same configuration as shown in the photo above.  One enterprising customer has mounted this board on an early American Flyer smoke unit.

“Internal” Smoke Stack

Many of our customers have asked for this item when upgrading/repairing steam engines.  This is a two part unit.  The bottom attaches to our smoke unit directly.  After installing, the top portion screws into the lower through the stack.

TAS Smoke Unit

Sometimes we have used TAS Smoke units and/or just the electronics.  These have been checked to ensure they are operational.

Description

Sunset Blower Smoke Unit

This is the newest blower type smoke unit manufactured by Sunset Models.  It has several improvements.

  • Full smoke is achieved at 8.5 VDC supporting both conventional and command control operation.
  • Supports external trigger for steam chuffing
  • Can connect to ERR Cruise Commander or MiniCommander 2
  • Dimensions 1″ W x 2.5″ L.  Height at bowl (with screws) is 7/8″, Height at blower motor is 1 3/8″
  • Can be used to upgrade some existing blower types by purchasing the board only
  • Royz Trains can support upgrade of your engine as room permits
  • This unit has been installed in both O Scale – 2 Rail and 3 Rail applications
  • Also installed in American Flyer S (room permitting) and G Scale Engines

Train America Studios Smoke Unit

I have a limited number of these as complete units and also just the board.  Used, but fully tested and operational!  No warranty on used items!  Includes the three pin connector and 6″ wires for replacing Lionel and other lesser quality smoke unit upgrade.

Additional information

Blower Smoke Unit

Blower Smoke Unit, New Electronics for smoke unit, Smoke Batting, TAS Smoke unit, TAS Smoke Board, Steam Inner Stack

Reviews

There are no reviews yet.

Be the first to review “Blower Smoke Unit”

Title

Go to Top